Filter
Top Products
12
Adjustments
Before placing child in seat, squeeze
both adjustment levers while pulling arm
rests apart to achieve the widest base
position. (Fig. A)
Place child in the seat. Squeeze both
adjustment levers to adjust the armrests
and base width to the desired position.
(Fig. B)
Note: Armrests should fit snugly against
child’s hips. As your child grows,
further width adjustments will become
necessary.
Adjusting the Width of the Base
Adjusting Headrest Height
Check fit with child seated in booster
seat.
With one hand, grasp and pull up on
height-adjustment handle located at
top rear of headrest. Use opposite
hand to stabilize the seat. (Fig. A)
Slide headrest up or down to the
desired height and release adjustment
handle. Repeat process until headrest
is positioned properly with the
shoulder belt resting comfortably
across the child’s shoulders. (Fig. B)
Tip: Make note of the adjustment
needed for a fit where the belt guides
are even with, or just above, the
child’s shoulder.
The base width can be adjusted for a proper fit, to improve side-impact
protection and provide greater comfort.
A
B
A
B
1
2
1