Filter
Top Products
11
Reclined Backrest Position:
Pull out the recline flap and slide down
until in reclined position. (Fig. A)
Recline the backrest until the recline
flap lies flat along the back of the
vehicle seat. (Fig. B)
WARNING: Do not recline the backrest
farther than the recline flap will allow.
This could cause the backrest to
become loose or unstable in the event
of a crash.
Upright Backrest Position:
Pull recline flap out and slide up until
in upright position, flush with backrest.
(Fig. C)
WARNING: Whether in reclined or
upright position, recline flap should
always be in full contact with the
vehicle seat when booster is installed.
Adjusting the Backrest
Use the two-position recline flap to adjust the back angle of the booster
seat.
A
B
1
2
Adjustments
C
3