Filter
Top Products
48
Lap Belt Installation
Before You Begin:
• Check that your vehicle belt is compatible for use with child
seats. See pages 8 – 13 for more information.
• Remove the Versa-Tether from the pouch and place it up
and over the child seat back.
* Britax recommends that the Versa-Tether is used at all times.
Using the tether will improve the stability of the child seat and
reduce the risk of injury. Check your vehicle owner’s manual for
tether anchor locations. Only attach the Versa-Tether to anchor
points designated to the chosen seating position as indicated
by your vehicle owner’s manual.
• This child seat must be in position 1 or 2 and placed
forward facing on the vehicle seat.
* Ensure that no more than 20% or 3 inches (7.6 cm) of the base
hangs over the edge of the vehicle seat. See page 21 for more
information.
Forward-Facing Installation