Filter
Top Products
35
Checklist
9 Check that the vehicle belt is securely fastened.
9 Check that the child seat cannot be moved front to back or side to side more
than 1 in. (2.5 cm) at the belt path. If the child seat is not secure, repeat
installation or use a different seating location.
9 Check that the back angle of the child seat is 30º – 45º from vertical (not to
exceed 45º) when the car is parked on a level surface.
* If necessary, the proper recline angle can be achieved by placing a
rolled towel or pool noodle in the vehicle seat bight.
8 Rear-facing installations can
be improved by the use of the
Versa-Tether (see pages 24 – 27).
9 Pull the buckle up through its
appropriate slot in the cover.
10 Replace the cover and the belly
pad.
Check buckle
connection
Check that the
child seat is
reclined to position 3
Check that there is
LESS than 1 in. (2.5 cm)
of movement (front to back or
side to side) at the belt path
Rear-Facing Installation