Filter
Top Products
20
Control Using an Expression Pedal
Connecting an expression pedal (Roland EV-
5; optional) to the TEMPO/EXP jack enables
you to control the respective parameters of
the E.LEVEL, F.BACK, and D.TIME knobs.
* Use only the specified expression pedal (Roland
EV-5; optional). By connecting any other
expression pedals, you risk causing malfunction
and/or damage to the unit.
Making the Settings for
Expression Pedal Functions
1.
Hold down the built-in pedal and con-
nect the expression pedal
The function-setting mode for the expres-
sion pedal is enabled and the CHECK in-
dicator lights in orange.
* The setting mode cannot be entered while
HOLD MODE is selected.
*
When connecting an expression pedal to the
TEMPO/EXP jack, set the minimum volume for the
connected expression pedal to the “MIN” position
.
2.
Make the settings for the parameters
Turn the E.LEVEL, F.BACK, and D.TIME
knobs to set the maximum values of the
ranges you want to control. If you don’t
want to control a particular parameter
with the expression pedal, set its value to
the “MIN” position.
* You can set only the maximum value of a
parameter range controlled using the expression
pedal. Setting the minimum value is not possible.
3.
Save the parameters
Press the built-in pedal switch to make
the CHECK indicator rapidly flash in or-
ange and save the settings.
After the settings have been saved, the
unit returns to normal operation.
* Never switch off the power while the CHECK
indicator is flashing rapidly.
* This setting is retained even while the power is
turned off.
DD-7_e.book 20 ページ ２００８年３月７日 金曜日 午前１１時１８分