Filter
Top Products
11
Operating the Unit
fig.
05
1.
Turn on the effect
After you have finished making the connec-
tions (p. 9), press the pedal switch to turn
the effect on
(the CHECK indicator lights red)
.
* The DD-7 features a “seamless switching function”
whereby the delay sound decays gradually, even
after the effects are switched off.
* When in HOLD mode, the effect cannot be
switched on or off.
*
You can obtain a variety of different delay effects
by changing how the connections are made. For
more information, refer to “Setting the Output
Method”(p. 16).
2.
Select the mode
Use the MODE knob to select the mode to
be used.
* Operations vary according to the mode. Refer to
each operation.
3.
Adjust the delay time
Adjust the delay time with the D.TIME
knob.
4.
Adjust the feedback level
Use the F.BACK knob to adjust the feedback
level (or how much the sound is repeated).
* Oscillation may occur with certain input sounds,
or when the knob is set at certain positions.
5.
Adjust the volume
Adjust the volume level of the effect
sound with the E.LEVEL knob.
4 3 25
DD-7_e.book 11 ページ ２００８年３月７日 金曜日 午前１１時１８分