Filter
Top Products
Decoder for Atlas N Scale H15/16-44 Locomotives 8
Atlas Model Railroad Co., Inc.
CV Reg. Description Range Default
Value
**
8 8 Manufacturers Identification:
This value is the manufacturer ID of the decoder,
(Atlas=127). Writing the decimal number “33”
to this Register will reset all CVs in the
decoder to their factory-default values
EXCEPT FOR the speed step settings in CV67
to CV94.
- 127
17
-
Long Address, High Byte
The long (also called extended) address, if used,
is contained in CV17 and CV18.
192-
231
0
18
-
Long Address, Low Byte
0-255 0
19
-
Advanced Consist Address
The Advanced Consist address, if used, is
stored in CV19.
1-99 0
29 Decoder Configuration, Byte 1:
Several decoder properties are set with CV29. Changes
are easiest if done in binary mode, but can also be done
by adding together the decimal values (shown in
parenthesis) for all the desired features and writing the
total into CV29. (For an example, see the section
Converting Binary Values of Individual Bits within a
Configuration Variable into the Equivalent Decimal Value
of the Entire CV.)
The definitions for the individual bits of CV29 are given
below.
0-55 6
Bit 0
Locomotive direction:
This bit sets the direction that the locomotive will
move when told to move forward in digital (DCC)
mode.
0 = locomotive’s direction is normal
1 = locomotive’s direction is reversed
0,1 0
(1)