Filter
Top Products
ADJUSTING THE GUIDE ARM
• Pull out 3 feet of hose and allow reel to lock in position.
• Remove the four bolts connecting guide arm to mounting base.
• Rotate guide arm in 90° increments to desired position total number of positions is five (5).
• Replace four bolts and tighten.
Continue by choosing proper mounting hardware. See illustration for Dimensions. Use washers on
mounting bolts to help bear weight of reel (Bolts and Washers are not included).
After reel is secured in position, attach air hose coming from compressor. Wrap threads of male connector
on incoming air hose with Teflon tape (included) or thread sealant and connect to air inlet valve on side of
hose reel. Connect other end of incoming air hose to air compressor. Apply Teflon tape to threads on hose
before attaching air tools.