Filter
Top Products
5
Setting the Unit
Setting the unit manually
1. Confirm that the scale is turned off.
Press the SET switch. The scale beeps
and displays the unit currently set.
2. Press the SET switch to select the unit.
3. After three seconds of non-operation,
the scale confirms the selected unit
with two beeps, displays “
” and
automatically turns off.
Setting the unit by the communication device
(Only for devices that rewriting of the unit information is enabled.)
1. Confirm that the scale is turned off.
Hold the communication symbol of
the NFC-enabled device close to the
communication area (
) of the scale.
2. When the data transmission is complete, the
scale displays “
” and automatically turns off.
Note
The NFC-enabled device may not be recognized
when it is slanted or placed out of the
communication area. If “
” or “ ” appears,
start from step 1 again.
SET switch
Press the SET switch.
Example: Cellular phone