Filter
Top Products
Display Symbols
-3-
Caution
❒ Insert the battery with the positive (+) and negative (-) terminals properly
aligned with the corresponding symbols in the Battery Compartment.
❒ Improper installation of the batteries may cause battery leakage.
❒ Replace four batteries with new ones, when symbol is displayed.
❒ Do not mix used and new batteries. It may result in damage to the scale or
shorten battery life.
❒ The battery life is dependant upon the environmental temperature, battery
type and usage.
❒ Remove the batteries from the battery compartment, when the scale is not
to be used for a long time. They may leak and damage your scale.
Steps for Installing (or Replacing) Batteries
1. Remove the battery compartment cover on the
underside of the scale by gently pushing on the
arrow and lifting the cover backward.
2. Place four new “AA” batteries with positive (+) and
negative (-) terminals properly aligned with the
corresponding symbols in the battery compartment.
3. Replace the cover by sliding it into the compartment
and gently pressing into place.
Installing (or Replacing) Batteries
Ready/Complete symbol. This symbol is displayed when the
measurement display is stable.
Low battery mark. If this mark is displayed, replace the batteries
with new ones.
kg
lb
kg
lb
WEIGHT A
WEIGHT B
Scale Components
-2-
❒ The following measurements can be selected by the Slide Switch and are
broken into two categories - WEIGHT A and WEIGHT B. Within WEIGHT A
and WEIGHT B, you have a choice to select and have your weight dis-
played in kg. or lb. The difference between WEIGHT A and WEIGHT B is
the speed of communication from the data port to another device (e.g.
modem, printer, telephone). Please follow instructions from your telemonitor-
ing company to select the proper position on the Slide Switch.
❒ The scale has an "automatic-power-off" function: When 0.0lb (0.0kg) is on
display, the scale will automatically switch off after 45 seconds of inactivity.
After a weight has been successfully measured, the scale will automatically
switch off after 15 seconds of inactivity.
Battery Compartment
Measurement Switch
Low Battery Mark
Ready/Complete Symbol
Slide Switch
BackFront