A&D GP-20K Building Set User Manual


 
69
Weighing input mode
In the weighing input mode, a sample tare container is placed on the pan to store the tare value.
Notes
Pressing the CAL key will interrupt the operation and the balance will return to the tare value
confirmation mode (step 3 in “Storing the tare value”).
To go to the digital input mode, press and hold the MODE key.
1 The first display in the weighing input mode is the
current weight value and the selected tare number
with PT blinking.
2 Press the RE-ZERO key to set the display to zero.
3 Place a tare (a container) on the pan.
4 Press the PRINT key to store the tare value. Remove
the tare from the pan.
Digital input mode
In the digital input mode, the tare value is entered digitally using the keys.
The display in the digital input mode is shown below.
The digit to be changed blinks.
Use the following keys to store a tare value in digital input mode.
SAMPLE key To select the digit to be
changed.
RE-ZERO key To change the value of the
selected digit.
PRINT key To store the tare value.
CAL key To return to the tare value
confirmation mode (step 3 in
“Storing the tare value”).
MODE key Press and hold to go to the
weighing input mode.