Filter
Top Products
1
Introduction
Accton’s Cheetah Wireless-3501C USB Adapter (WN3501C) is an 11 Mbps wireless
network adapter that seamlessly integrates with existing Ethernet networks to support
applications such as mobile users or temporary conferences. The adapter is fully
compliant with 2.4 GHz DSSS CSMA/CA wireless networking as defined in IEEE
802.11b.
This solution offers fast, reliable wireless connectivity with considerable cost savings over
wired LANs (which include long-term maintenance overhead for cabling). Just plug
wireless adapters into your desktop PCs and start networking.
Using this adapter in conjunction with an Accton Cheetah Wireless Access Point or
Wireless Access Point/Bridge, you can create an instant network that integrates
seamlessly with 10 Mbps Ethernet LANs. Moreover, moving or expanding your network is
as easy as moving or installing additional Wireless AP/Bridges – no wires!
System Requirements
Before you install the Cheetah Wireless-3501C USB Adapter, verify that your system
meets the following requirements:
• An available USB port
• Windows 98/Me/2000/XP (have the Windows installation CD-ROM ready for use during
driver installation)
• A minimum of 1 MB of free disk space for installing the driver and utility program
• Another IEEE 802.11b compliant device installed in your network, such as a Wireless
Access Point, or another PC with a wireless adapter
Package Checklist
The Cheetah Wireless-3501C USB Adapter package includes:
• 1 Cheetah Wireless-3501C USB Adapter with internal antenna (WN3501C)
• 1 CD ROM containing drivers, utility, and documentation
• 1 USB cable
• 1 Fastening clip
• 3 Pieces of velcro
• 2 Magnets
• This Quick Installation Guide
• 1 registration card (please complete and return)
Please complete the warranty registration card and return to Accton or register online at:
register.acctontech.com. To order the optional boot ROM, contact your local Accton
dealer or reseller.