5-2
5
Engine oil
• Check oil level in engine, and add recommended oil to specified lev-
el if necessary.
• Check ATV for oil leakage. Correct if necessary.
5-3, 8-11
Final gear oil • Check ATV for oil leakage. Correct if necessary. 5-3, 8-15
Front brake
• Check operation. If soft or spongy, have Yamaha dealer bleed hy-
draulic system.
• Check brake pads for wear, and replace if necessary.
• Check brake fluid level in reservoir, and add recommended brake
fluid to specified level if necessary.
• Check hydraulic system for leakage. Correct if necessary.
5-4, 8-26, 8-27, 8-29
Rear brake
• Check operation, and correct if necessary.
• Lubricate cables if necessary.
• Check lever and pedal free play, and adjust if necessary.
5-4, 8-26, 8-29
Throttle lever
• Make sure that operation is smooth. Lubricate cable and lever hous-
ing if necessary.
• Check cable free play, and adjust if necessary.
5-5, 8-25
Control cables • Make sure that operation is smooth. Lubricate if necessary. 8-34
Wheels and tires
• Check wheel condition, and replace if damaged.
• Check tire condition and tread depth. Replace if necessary.
• Check air pressure. Correct if necessary.
5-6, 5-7, 5-8
Brake pedal
• Make sure that operation is smooth. Lubricate pedal pivoting point if
necessary.
8-35
Brake levers
• Make sure that operation is smooth. Lubricate lever pivoting points if
necessary.
8-34
Axle boots • Check for cracks or damage, and replace if necessary. 8-33
Chassis fasteners • Make sure that all nuts, bolts and screws are properly tightened. 5-8
Instruments, lights and
switches
• Check operation, and correct if necessary. 5-8
ITEM ROUTINE PAGE
U3D513E0.book Page 2 Monday, May 19, 2008 3:19 PM
