User Guide 9
OverviewSquareFold Trimmer Module
Trimmer feature
Accessin
the Trimmer o
tions
From the machine's UI select Copy and the Output Format tab.
The Trimmer feature can be selected for both your copy and network print jobs. Depending on the copy/print job, the
Trimmer feature can be selected from either the machine's UI or from the print driver on your workstation.
If your machine is connected to a print server, the Trimmer feature can also be selected at the print server for the
selected job.
The Trimmer feature is available only when your machine is connected to both a finisher with a booklet maker and
the
SquareFold Trimmer Module.
Note
To access the Trimmer feature, perform one of the following (as applicable for your copy or network print job):
1.
For copy jobs, perform the following:
Select either Booklet Creation or Folding.
- If using the Booklet Creation feature, continue to Step 3.
- If using only
the Folding feature, continue to Step 4.
2.
From the Booklet Creation screen, select On and Fold & Staple.
From the • Booklet Creation - Fold & Staple screen, select either Fold Only or Fold & Staple.
To access the Trimmer feature, select the • Booklet Trimming/Pressing button.
3.
For information on each Trimmer option, continue to the section entitled "Trimmer options."
Note
From the Folding screen, select Single Fold.
Select • Fold as a Set.
Select the • Booklet Trimming/Pressing button to access the Trimmer feature.
4.
