Operation for Bell TV Users
3 Operation
The interface box will ask for a
password. Press [ENTER] four times to
enter code “0000” on the display.
Press and hold [POWER] for two
seconds or until the TRAV’LER interface
displays “POWER ON.”
Now that the power is on, release the
[POWER] button.
WINEGARD COMPANY
POWER ON
connecting to
antenna
Press [SELECT] until the asterisk is next
to “SM Mount,” and then press [ENTER].
LG Mount
SM Mount*
Press [SELECT] until the asterisk is next
to “SM ExpressVu.” Press [ENTER].
SM ExpressVu*
Installation
Operation for Bell TV Users
Operation 4
The TRAV’LER interface box will try
to determine the type of dish that it is
working with. The TRAV’LER interface
will display the type of satellite dish on
the top line.
Press [ENTER] and then choose
[SELECT] until the asterisk is next to
Installation. Press [ENTER].
Press [SELECT] until the asterisk is next
to “Exit.” Press [ENTER].
Installation*
SM DTV Triple
Exit*
Select Antenna
The antenna will peak on a signal.
SM ExpressVu
Peaking...
The User Menu consists of four choices:
Search Mode, Diagnostics, Installation,
and Exit. Press [SELECT] until the
asterisk is next to “Installation” and then
press [ENTER].
The TRAV’LER interface box will ask if
you want to turn the power off. Select
“No” by pressing [ENTER].
TIP
If you want to turn off the power to the TRAV’LER antenna after the antenna has locked onto satellites, press
[POWER] and [SELECT] at the same time. Before traveling, make sure to press [POWER] and wait for the
TRAV’LER antenna to stow. See page 6 for more information on stowing before traveling.
Install Password
0000
Installation*
Exit
Press [ENTER] to choose “Select Antenna.”
Select Antenna*
Raise Antenna
Enter code “0022” by pressing [SELECT]
to increase each number. Press [ENTER].
SM Password
0022
Press [SELECT] until the asterisk is next
to “Yes.” Press [ENTER].
SM ExpressVu
*Yes No
Press and hold the [ENTER] button for
two seconds.The TRAV’LER interface will
ask if you wish to enter the User Menu.
Press [SELECT] to choose “Yes”; then,
press [ENTER].
Enter User Menu?
*Yes No
1
2
3 4
5
6
7 8
9
10
The TRAV’LER interface box will display
“in progress” and then “Success”.
SM ExpressVu
Success
SM ExpressVu
Ready: Multi-Sat
Power Off?
Yes *No
The TRAV’LER antenna will enter the search
mode as part of its normal operation.
SM ExpressVu
Searching...
The TRAV’LER antenna will lock onto two
different satellites. As the antenna finishes
searching, the antenna will display an
asterisk for each satellite found.
SM ExpressVu
*91 *82
11 12
13 14
15 16
17 18
