A SERVICE OF

logo

TROUBLE
SHOOTING
GUIDE
Dead electrical circuit
Power switch failure
Faulty power cord
I
1
Faulty switch
Vac motor, hose or dome gasket
I
Improper solution hose connection
Prop
Screen in filter clogged
Valve clogged
Check building circuit breaker or fuse box
Replace
Replace
Follow grounding instructions exactly.
Contact an electrician to check building’s wir
-
ing.
Have a trained service technician check
machine’s wiring
Replace
Replace
Replace
Center and seal dome over tank.
Replace or repair using acrylic plastic cement
only.
With power
off
clean screen.
Tighten cuffs turning counterclockwise.
Replace.
Wash out with hose. Pick lint out with a wire.
Replace.
Check for positive connection
Remove and clean with hot water.
Clean or replace if damaged. Check to be
sure
filter screen is in place. Be sure to pre
-
mix
cleaning
chemicals.
TCZOE
98447 7/1/97