8 English
Î Release the star grips for the push hand-
le fastening.
Î Swivel the push handle backwards and
tighten the star grips.
Î Use the long boards on the sides of the
packaging as a ramp by placing them
against the pallet.
Î Fix the ramp to the pallet with nails.
Î Place short boards underneath the ramp
to act as a support.
Î Remove the wooden bars in front of the
wheels.
Î Push the machine down the ramp from
the pallet.
The brushes must be installed before the in-
itial operation (see "Maintenance works").
Î Insert the squeegee tool into the squee-
gee tool suspension in such a manner
that the profiled sheet is positioned abo-
ve the suspension. Tighten the wing
nuts.
Î Insert the suction hose.
ṇ Warning!
Risk of damage. Raise the squeegee tool
before reversing.
Note
To deactivate the brush drive immediately,
release the control handle.
ṇ Warning
Risk of damage. Only use the recommended
detergents. With respect to different deter-
gents the operator bears the increased risk
regarding the operational safety and danger
of accident. Only use detergents that are
free from solvents, hydrochloric acid and hy-
drofluoric acid.
Note
Do not use highly foaming detergents. Ob-
serve the dosing notes.
Î Open the cover of the fresh water reser-
voir.
Î Fill in the water detergent mixture up to
the MAX marking of the filling level dis-
play. Maximum temperature of the liquid
60°C / 140 °F.
Î Close the cover of the fresh water reser-
voir.
When the running gear is turned to the front,
the machine can be pushed to the place of
use without the brushes touching the floor.
Î Raise the squeegee tool.
Î Press the machine down using the push
handle.
Î Turn the running gear to the front with
your foot.
Î Use the push handle to push the machi-
ne to the place of use.
Before operating
Unloading
Installing the Brushes
Installing the Squeegee Tool
Operation
Filling in Detergents
Driving to the place of use
