OPERATING YOUR APPLIANCE
It is recommended you install the appliance in a place where the ambient temperature is between 72º-
78ºF / 23º-26ºC. If the ambient temperature is above or below recommended temperatures, the
performance may be affected. For example, placing your appliance in extreme cold or hot conditions may
cause interior temperatures to fluctuate.
RECOMMENDED TEMPERATURE SETTINGS
CONTROLS
Model BWR-18SD 18 bottle wine refrigerator
POWER
To turn on/off this appliance. To turn OFF the appliance, touch the button and hold 5 seconds.
LIGHT
To turn on/off the interior light.
To change the displayed temperature from Fahrenheit or Celsius or Celsius to Fahrenheit, press the
button for 5 seconds.
UP
To raise the set temperature by 1°C/ ºF.
DOWN
To lower the set temperature by 1°C/ ºF.
SETTING A TEMPERATURE
You can set the internal temperature as desired by touching the UP or DOWN buttons. When touch the
two buttons for the first time, the LED readout will show the original temperature set previously (the
factory preset temperature is 54°F/12°C).
The set temperature will increase by 1°F/°C when the UP button is pressed once. The set temperature
will decrease by 1°F/°C when the DOWN button is pressed once.
To view the “set” temperature at any time, touch the UP or DOWN button, the “set” temperature will
temporarily “flash” in the LED display for 5 seconds.
The internal temperature will appear in blue color in the temperature display window.
