Vision Fitness R2600HRT Manual

A SERVICE OF

next previous

6

3

STEP

• Mount the upper handlebars to the

console mast using two lock washers

(M8) and two screws (M8x15L).

Tighten with the 5mm Allen wrench.

• Remove the four mounting screws from

the back of the console. Connect the

wire harness and heart rate wires that

come from the console mast into the

plugs located in the back of the console.

Make sure the 9-Volt battery is plugged

in and in place on the console. Attach

the console to the mast with the four

screws removed earlier.

PINK BAG

3

STEP

Console Mast

Handlebar