ADMINISTRATION
699-Test Coin System
This item allows testing of the coin validator without causing the credit to appear
on the system. It will show how many pulses have been received and what that
translates to in money.
Hardware & System Settings
701-Primary User Input Device
Sets the primary user input to touch screen or touch pad controller. The only thing
this item does is control the visibility of the Go Back button on the user screens
and the wording of some messages.
702-Touch Pad Sensitivity
Sets the touch pad sensitivity to light normal or heavy.
703-Calibrate Touch Screen
Calls the 3M touch calibration program. Touch the two points on the screen when
prompted. Touch the Done button when finished.
704-Test Touch Screen
Shows a screen with a target to enable testing of the touch screen.
705-Set Time
Select this item to set the time.
706-Set Date
Sets the date. Warning: Changing the date by more than a day or two may
interfere with the security settings and cause system malfunction.
710-Automatically Switch On When Power Is Applied
When set, the system will switch itself on automatically when it is plugged in.
711-Allow Switch On From Touch Pad
When this item is set, the system can be switched on by pressing the PAGE UP
and SELECT touch pads simultaneously.
2525
2330 - SCORPION OPERATOR MANUAL
