Continuous output
capacity (watts)
2000
Peak output
capacity (watts)
4000
INPUT
Input connection
type
DC INPUT: Set of 4 DC bolt-down terminals (2 red / 2 black). AC INPUT: hardwire (2 input circuits - see manual)
Input cord length DC INPUT: User supplies cabling. 0 gauge or larger (see manual). AC INPUT: hardwire
Recommended
Electrical Service
DC INPUT: Requires 12VDC input source capable of delivering 185A for the required duration (when used at full
continuous capacity - DC requirements increase during Over-Power and Double-Boost operation). For automotive
applications, professional hardwire
Maximum input
amps / watts
DC INPUT: Full continuous load - 190A at 12VDC. AC INPUT: 60 amps total (40A line 1 / 20A line 2) at 120VAC with full
inverter and charger load (25A max charger-only from line 1 / combined input load to support charger and AC output is
automatically controlled
BATTERY
Expandable
battery runtime
Runtime is expandable with any number of user supplied wet or gel type batteries
DC system voltage 12V
Battery recharge
rate
25A /100A (selectable)
LEDS ALARMS & SWITCHES
Front panel LEDs Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7
levels reported). See manual for sequences.
Switches 3-position on/off/remote switch enables simple on/off power control plus auto/remote setting that enables distant on/off
control of the inverter system when used in conjunction with APSRM4 accessory (sold separately) in inverter mode. In AC
uninterruptible power mode, auto/remote setting enables automatic transfer from line power to battery power, maintaining
continuous AC power to connected loads.
SURGE / NOISE SUPPRESSION
AC surge
suppression
450 joules AC surge suppression included
PHYSICAL
Shipping weight
(lbs)
58.8
Shipping weight
(kg)
26.7
Shipping
Dimensions
(HWD/in)
15.25 x 16 x 24
Shipping
Dimensions
(HWD/cm)
38.7 x 40.6 x 60.9
Unit weight (lbs) 53
Unit weight (kg) 24.1
Unit Dimensions
(HWD/in)
9.75 x 11.25 x 16.5
Unit Dimensions
(HWD/cm)
24.8 x 28.6 x 41.9
Material of
construction
Steel
Form factors
supported
Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting
information)
Cooling method Multi-speed fan
Style Heavy-duty with built-in battery charger
ENVIRONMENTAL
