SLASH VXL
•
5
TOOLS, SUPPLIES AND REQUIRED EQUIPMENT
Your model comes with a set of specialty metric tools. You’ll need to purchase other items, available from your hobby dealer, to operate and
maintain your model.
Recommended Equipment
These items are not required
for the operation of your
model, but are a good idea to
include in any R/C toolbox:
• Safety glasses
• Thin, hobby-quality
cyanoacrylate instant tire
glue (CA glue)
• Hobby knife
• Side cutters and/or needle
nose pliers
• Philips screwdriver
• Soldering iron
For more information on
batteries, see Use the Right
Batteries on page 11.
Supplied Tools and Equipment
4 AA alkaline
batteries
NiMH battery charger*
7-cell NiMH battery pack with
Traxxas High-Current Connector*
Required Equipment
(sold separately)
*Battery and charger style are subject to change and may vary from images.
2.0mm “L” wrench 1.5mm “L” wrench
Turnbuckle wrench
U-joint wrench 4-way wrench2.5mm “L” wrench
Antenna nut
wrench
Aftermarket
servo adapters
Pre-load spacers and shock pistons
(on parts tree) see page 21
Battery hold-down pad (to reduce
battery vibration, if necessary)
Body clips and
body washers
Optional Pinion
Gear see page 22
