A SERVICE OF

logo

TL-WR702N 150Mbps Wireless N Nano Router
- 153 -
8.7.1 DHCP Settings
Choose menu “DHCP DHCP Settings”, and you can see the page as shown in Figure 8-10, if
you have chose Smart IP(DHCP) in Network LAN, in which situation the device will help you
configure the DHCP automatically as you need. If you have chose Static IP in Network LAN,
you can see the page as shown in Figure 8-11, and then you can configure the DHCP Server on
this p
age. The Router is set up by default as a DHCP (Dynamic Host Configuration Protocol)
server, which provides the TCP/IP configuration for all the PC(s) that are connected to the Router
in the LAN.
Figure 8-10 DHCP Settings
Figure 8-11 DHCP Settings