66
Daily use
How to switch on the set?
With the On/Off-button fitted on the set. When the red
LED is lit, the TV set has previously been switched on
standby with the key
B
on the remote control.
If the red LED flashes, it means that the control
keyboard of the TV is locked and can only be made
operational again through the remote control.
In both cases, enter a channel number.
How to select a channel?
Through the digital keys of the remote control.
For two figure channels (10, 11, 12, etc.) press the
0 key on the remote control unite twice.
“ --” appears on the screen. Through the digital
keys, enter the tens unit digit, then the unit one
(you can also quickly enter the two digits).
With the PR+ or PR- button of the remote control or
the keypad.
If you change the channel with the PR+ or PR-
buttons of the keypad, maintain the button pressed
until the next or preceding channel appears on the
screen.
How to adjust the volume?
- With the remote control, by making short pulses or
maintaining the VOL+/- buttons pressed.
- With the keypad of the television, by maintaining
buttons VOL+/- pressed.
How to mute the sound?
With the ( ) key.
Press once more on the key to reactivate the sound.
Operating the zoom:
Using the Left/Right directional keys, select:
- 4/3 format,
- 14/9 zoom (14/9 letterbox format),
- 16/9 zoom (16/9 letterbox format),
- 16/9 zoom subtitles (16/9 letterbox format – subtitles),
- Cinerama zoom (optional),
- 16/9 format.
Zoom functions are only available on 16/9 TV sets.
How to display the channel number?
With the INFO key, display or remove the channel
number and, if you want it, the time left before timer-
programmed switch-off.
How to recall the preferred settings?
Press on the red key to recall the sound and picture
settings you previously stored (see page 5).
How to programme a switch-off?
Press on the Green (Z
ZZ/LIST), key, then using the
Left/Right keys, adjust on the screen the wished-for
duration before the switching-off of the TV set (by
intervals of 5 minutes up to 4 hours).
To exit the menu, press EXIT.
When the programmed remaining time is over, the
TV set will switch on standby.
To cancel, first press the Green (Z
ZZ/LIST) and then,
by means of the directional key Left, reset the time
remaining on 00:00.
The programmed switching-off is also deactivated when
the TV set is turned off through its own On/Off switch.
How to prevent kids using the TV set?
Hold key
BB
on the remote control down for over 5
seconds until the red LED on the TV set flashes.
The keys of the TV set are now locked and switching
it on again will be possible by means of the remote
control only.
Keep the remote control out of the reach of children.
To unlock the keys of the TV set, make use of the
number keys on the remote control.
The keys of the TV set will also remain locked after
timer-programmed switching-off.
The lock function will also be activated when the TV
set is switched on standby or switched off with its
On/Off switch before the time remaining until
programmed switching-off is over.
How to switch off the set?
To switch the TV set off, press the key
B
on the
remote control or use the On/Off switch on the TV set.
The TV set automatically switches to stand-by after a
few minutes without telecast on the selected channel.
Important:
The display SIGNAL = 0 on the grey screen means
that you are on an AV programme and that the TV set
is not receiving any signal.
ITC008_en 3/03/03 16:33 Page 6
