Page 4
Attaching the Accessories
will attach to the hose in the
Push the Floor Brush firmly onto
same way as the floor brush
the end of the hose extension/s (or
directly onto the hose handle if you
are not using the extension tube).
The Crevice Tool
VC010 Vacuum Cleaner User Guide
Operating your Vacuum Cleaner
To extend the power cord:
When vacuuming:
Gently pull the cord from the recess
Move the vacuum head back and forth over the surface. Use
located in the rear of the cleaner.
even strokes. Do not press- let the cleaner do the work.
The cord has two marks.
Open and close the airflow slider to vary the suction power of
The yellow mark shows the
the cleaner.
maximum safe length to which you
can extend the cord. If you can see
the red mark the cord has been
lengthened too much.
Never extend the cord beyond
the red mark or you may
damage the cord winding
mechanism.
To rewind the cord: Unplug
the cord. Press the Cord
Using the Accessories
Release Lever. Gently guide
the cord back by hand into
The Floor Brush is adjustable for use on carpets or bare floors.
the cleaner until it is fully
rewound. Do not let the cord
return unaided or it may whip
Bare Floors: Press the lever
and cause damage or injury.
showing the Brush Symbol.
The brush will appear .
Smooth Floors: Press the
Using the Appliance
lever showing the Floor
Connect the hose and extensions to the appliance.
symbol to retract the floor
brush.
Open the airflow slider in the handle.
Extend the power cord to a usable length.
Plug the unit into the mains and switch on the power.
Press the Mains ON/OFF
pedal to switch the power
ON. (Press again to
switch the power OFF)
The Crevice Tool is a dual-purpose
tool. Use it extended to vacuum
down the side of cushions, etc. Turn
the head through 90ยบ to clean
curtains, etc.
Never attach or remove accessories when the vacuum cleaner is switched on.
