SAFETY GUIDE - PLEASE READ CAREFULLY
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
Please follow all the safety precautions listed below for
or instruction concerning use of the appliance by a
safety and to reduce the risk of injury or electrical shock.
person responsible for their safety.
$Read all the instructions carefully before using your
$Children should be supervised to ensure that they do
blender and keep them for future reference.
not play with the appliance.
$Unplug the appliance from the mains supply when
not in use, when removing or attaching accessories,
When operating your appliance:
or before cleaning any part of the appliance.
$When the appliance is not in use make sure that it is
$This appliance is for occasional household use only.
safely unplugged from the mains supply.
$Do not use outdoors or in damp conditions.
$To reduce the risk of injury, never attach the blade
$Do not immerse the motor unit or the electrical cord
without first securing the bowl properly in place.
or plug in liquids.
$When using the appliance ensure there is adequate
$Do not use near a source of heat or on an unstable
room in the vessel.
surface.
$Do not operate the appliance with an empty bowl.
$Ensure that the power cord does not touch any hot
$Do not run the appliance continuously for more
surface and that it does not overhang the edge of
than15 seconds. After 15 seconds of continuous use
your work surface.
let the unit cool for 3 minutes before using it again.
$When unplugging the power cord, hold the plug top,
$The blade on this appliance is sharp. Treat it with care
not the power cord.
at all times and never allow fingers, hair, or clothing
$Do not operate any appliance with a damaged cord
to come into contact with the blade.
or plug or after the appliance malfunctions, or is
$If you wish to scrape the contents of the bowl with a
dropped or damaged in any manner. Return the
spatula, remove the blade first.
appliance to the nearest authorised service facility
$Do not process food containing hard objects which
for examination, repair or electrical or mechanical
cannot be safely broken up by the blade.
adjustment.
$If the blade gets clogged, switch off, unplug from the
$Do not use attachments or accessories which are not
mains and allow the unit to stop before clearing the
recommended by the manufacturer. They may cause
obstruction.
malfunction or injury.
$Operate the appliance is on a sturdy work surface.
$Do not attempt to replace the power cord on this
and hold or support it during operation
appliance. This should only be carried out by
$Do not yank or pull the cord as this may damage it
authorised service personnel with specialist tools.
and eventually cause a risk of electric shock.
$Store the appliance away from direct sunlight and
$To protect against fire, do not operate the unit in the
out of the reach of children.
presence of explosive and/or flammable fumes.
$There are no user serviceable parts in your appliance
$Keep the blender out of the reach of children.
Unauthorised dismantling or servicing will void the
product warranty.
$Do not use the appliance for any purpose not
expressly specified in this manual.
NEVER process hot foods, and especially hot liquids.
$This appliance is not intended for use by persons
(including children) with reduced physical, sensory
NOTE: Never process liquids or foods with a high liquid
content as they may leak into the appliance motor.
COMPONENTS AND CONTROLS
Ensure the appliance is disconnected from
the mains.
Place the unit on a solid level surface and
hold it securely.
Align the bowl on the base and then turn the
bowl clockwise until it is locked onto the
motor base.
Page 2 Page 3 Page 4
Lid
Motor Spindle
Chopping Blade
Base
UNPACKING PRELIMINARIES
The appliance is supplied fully assembled. Refer to the Always make sure the appliance is unplugged from the
illustration above and identify the components. mains when cleaning, attaching or removing accessories
Remove all packaging from the appliance. Retain the
Before using your appliance for the first time:
packaging. If you dispose of it please do so according to
Disassemble the components. Refer to the assembly
any recycling regulations.
instructions on the next page and reverse the procedure.
If items are missing or damaged, contact your nearest
Wash the mixing bowl and the lid in warm soapy water,
Tesco store for assistance.
rinse and dry thoroughly.
Read and retain the manual. If you pass the product on to
Wash the blade assembly in warm soapy water taking
a third party, make sure to include this manual.
care not to touch the cutting surfaces, rinse and dry
thoroughly.
Wipe the motor unit all over with a soft cloth dampened
with soapy water followed with a clean damp cloth.
Dry well. Do not immerse the motor unit, mains cable or
plug in water.
ASSEMBLY
Hold the blade by the collar. Place the blade
over the spindle in the base. and drop it into
place. Rotate the blade slightly to ensure it is
fully in position.
When the blade is in position you may insert
the food. Refer to the next pages for
guidance on food preparation.
Place the lid on the bowl. Locate the lug in
the slot st the top of the motor unit.
Now turn the lid clockwise (to the right) and
make sure it locks firmly into position.
(There is a guide on the lid to help you,)
IF THE BOWL AND THE LID ARE NOT
SECURELY LOCKED THE APPLIANCE
WILL NOT OPERATE.
THIS IS A SAFETY FEATURE
MC11 USER GUIDE MC11 USER GUIDE MC11 USER GUIDE
ON/OFF Switch
Bowl
UNLOCK
LOCK
UNLOCK
LOCK
