8
LISTENING TO FM RADIO LISTENING TO DAB RADIO
SELECTING DAB RADIO OPERATION
To select DAB radio operation:
Touch the • FUNCTION touchpad (or press the FUNCTION button
on the remote control) repeatedly until ‘DAB’ is displayed.
After a few seconds, the radio will tune to the last-used station.
INITIAL DAB RADIO SCAN
When DAB radio is used for the rst time:
The system scans all usable stations (full scan) and stores
them alphanumerically -1 Radio, 2 Radio, AA Radio...
The initial scan will take a few minutes and a progress bar
will be displayed with the number of services found.
After the scan, the clock will be set, the radio will display the
rst station in the sequence and begin playing at the default
system volume of 13.
Note: If no stations are found after the scan, it may be that the
signal in your current location is too weak. If this happens,
switch the radio o and move it to a location with a stronger
signal. Repeat the scan process in the new location.
The stations found will be stored in an alphanumeric list.
TO SELECT ANOTHER STATION
Press the • { or } button to browse the list of stations
on the display.
When you nd the station name you want to listen to, •
press the ENTER button.
DAB and FM presets
Your radio can store up to 10 of your favourite stations as
presets (numbers 0-9) on both the DAB and FM bands for
quick recall.
To store a preset
Tune to the station you want to store as a preset.•
From the remote control, press and • hold the NUMBER
(0-9) button for the preset location you want to store.
The display will conrm that the station has been stored in this
preset number.
To recall a preset
Press the • NUMBER (0-9) button briey to recall a station
stored in this preset number.
The radio will re-tune to the preset station number that you
selected.
STATION PRESETS
To change to the FM band
Touch the • FUNCTION touchpad (or press the FUNCTION
button on the remote control) repeatedly until ‘FM’ is
displayed.
To manually tune to FM stations
Press the• { or } button repeatedly to tune down or up
the band one frequency step at a time.
To auto-tune to FM stations
Press the • /,/SCAN button to tune to the next station
in the band.
To change the sweep direction, press the • { button (to
tune down) or } button (to tune up) before pressing the
/,/SCAN button.
Tuning will stop automatically when the station is reached.
Number of services found
