Page 22 of 53
Operating and Installation packet
Detailed recommended spare parts list
Electrical schematic and panel layout drawings
Component instruction manuals
Re-inspect the container and packing material to see if you missed
any smaller items during unpacking.
3-4 If the Shipment is Not Correct
If the shipment is not what you ordered, contact the shipping
department immediately. For shipments in the United States and
Canada, call 1 (800) 229-2919; for all other countries, call our
international desk at (508) 399-3100. Have the order number and
item number available.
Hold the items until you receive shipping instructions.
3-5 Returns
Important!
Do not return any damaged or incorrect items until you receive shipping
instructions from the shipping department.
3-6 Uncrating Your Granulator
Prepare in advance the site you have selected for installation of the
granulator. Be certain that the area to be occupied by the machine
is clean, level, and free of obstructions. The site you have selected
must have a floor rating to adequately support the weight of the
machine.
Your granulator is mounted on a wooden skid and blocked and
banded to secure it for shipment. All non-painted items subject to
corrosion are coated with a quality rust preventative, and the
machine is covered with heavy-duty polyethylene to protect it from
moisture and dirt. Granulators are normally shipped completely
assembled unless the size of the machine or an agreement for
special shipping arrangements prompts partial assembly.
If inspection, after shipment, has revealed no shipping damage,
unpack the unit by removing the polyethylene protective covering
and banding. Remove the envelope with the parts list, assembly
