A SERVICE OF

logo

Open as PDF
next previous
Enable printing of a// character codes
Mode
ASCII Decimal
Hexadecimal
IBM
eESC> ‘T’ nl n2
27 92 nl n2 10 5C nl n2
Enables printing of all characters in the IBM character set, including
those assigned to character codes which are normally considered
control codes. This command remains in effect for the next nl + n2
x 256 character, where nl and n2 are numbers between 0 and 255.
During this interval no control functions am executed. If a code with
no assigned character is received, the printer prints a space.
Enable printing of all character codes on next
character
Mode
ASCII
Decimal Hexadecimal
IBM
<Esc> “c)” 27 94 10 5E
This command operates like &SC> ‘Y” except that it remains in
effect for only one character.
Select slash zero
Mode
ASCII Decimal Hexadecimal
&SC>
6‘ 39
I
Std.
“1”
27 126 49
10 7E 31
<ESC>
‘4 ” - <l>
27 126 1
10 7E 01
Causes subsequent zero characters to be overprinted with a slash
(0).
Select normal zero
Mode
ASCII
Decimal
Hexadecimal
<ES6
“ 1,
_
“ 0 9,
27 126 48
10 7E 30
Std.
<Rx>
“ -" <o>
27 126 0
10 7E 00
Causes subsequent zero characters to be printed normally (0),
without a slash.
49