39
Getting Started
again to record new images, see “Deleting all
scenes on the disc (Formatting)” on page 76.
• You can check the right disc using [DISC
SELECT GUIDE] on the HOME MENU (page
75).
You can use only a “Memory Stick Duo”
marked with or
(p. 132).
1 Open the LCD panel.
2 Insert the “Memory Stick Duo”
into the “Memory Stick Duo” slot
in the right direction until it clicks.
To eject a “Memory Stick Duo”
Open the LCD panel, lightly push the
“Memory Stick Duo” in once.
b Notes
• When the access lamp is lit or flashing, your
camcorder is reading/writing data. Do not shake
or knock your camcorder, turn the power off,
eject the “Memory Stick Duo,” or remove the
battery pack. Otherwise, image data may be
damaged.
• If you force the “Memory Stick Duo” into the
slot in the wrong direction, the “Memory Stick
Duo,” the “Memory Stick Duo” slot, or image
data may be damaged.
• When inserting or ejecting the “Memory Stick
Duo,” be careful so that the “Memory Stick
Duo” does not pop out and drop.
z Tips
• The number of recordable images vary,
depending on the image quality or the image
size. For details, see page 85.
“Memory Stick Duo”
Access lamp
(“Memory Stick Duo”)
