Displaying the Markers and Zebra Patterns
44
Recording
Displaying the guide frame lines
Set “Guide Frame” to “On” to insert the guide
frame lines into the screen area.
A zebra pattern(s) can be inserted to the picture
on the LCD monitor/viewfinder screen to check
the appropriate luminance level.
Turning the zebra-pattern indication on/
off
Pressing the ZEBRA button turns the zebra-
pattern indication on/off.
Changing the zebra pattern
Using “Zebra” of the LCD/VF SET menu, you
can change the zebra pattern to be displayed.
Press the MENU button to set the camcorder to
Menu mode, display the LCD/VF SET menu with
, and select “Zebra” from the menu.
Zebra Select
Select the zebra pattern(s) to be displayed.
1 (Zebra1): To display a zebra pattern in the area
of ±10% centering the video level set with
“Zebra1 Level.”
2 (Zebra2): To display a zebra pattern for the
video level over 100%.
Both: To display both Zebra1 and Zebra2.
Zebra1 Level
Set the center level of Zebra1 in the range of 50 to
107%. The default setting is 70%.
Displaying the Zebra Patterns
TCG 00:00:00:00 120min
STBY
Factory-set zebras
2 (100%)
1 (70%)
B
A
PRST
ZEBRA PEAKING
E
CE
ZEBRA button
00:00
LCD
VF
Peaking
M
arker
Zebra
Display
O
n/
O
ff
LCD/VF
SET
Zebra
Select
Zebra1
Level
:
1
:
70
B
B
B
B
B
B
