26
GB
Note
The Auto Calibration function does not work when
headphones are connected.
1 Connect the supplied optimizer
microphone to the AUTO CAL
MIC jack.
2 Set up the optimizer
microphone.
Place the optimizer microphone at your
listening position.You can also use a stool
or tripod so that the optimizer
microphone remains at the same height as
your ears.
Press AMP MENU, then press
AUTO CAL.
Measurement starts in 5 seconds and the
display changes as follows:
A.CAL [5] t A.CAL [4] t A.CAL [3] t
A.CAL [2] t A.CAL [1]
While the time is counting down, stand away
from the measurement area to avoid
measurement error.
The table below shows the display when
measurement starts.
* The corresponding speaker indicator lights up in
the display during measurement.
AUTO CAL MIC
PHONES
MEMORY
FM MODE TUNING
+
PRESET TUNING
VIDEO 1VIDEO 2DVDSA-CD/CDFM AM
AMP MENUENTER MASTER
VOLUME
INPUT MODE
+
DISPLAYDIMMER
2CH A.F.D. MOVIEMUSIC
?/1
Optimizer microphone
Performing Auto Calibration
Measurement for Display
Environment noise level NOISE.CHK
Speaker connection MEASURE and SP
DET. appears
alternately*
Speaker level MEASURE and GAIN
appears alternately*
Speaker distance MEASURE and
DISTANCE appears
alternately*
123
46
78
0/10
ENTER
9
SYSTEM STANDBY
TV/VIDEO
SLEEP
AUTO
CAL
AV
?/1
VIDEO 1 VIDEO 2 DVD SA-CD/CD
2CH A.F.D.
RETURN/EXIT MENU
MOVIE MUSIC
MEMORY DVD MENU
CLEAR
TOOLSDISPLAY
MUTING
TV VOL
MASTER VOL
FM MODE
D.TUNING
D.SKIP
DUAL MONO
TUNER
AMP MENU
TV
?/1
?/1
-
F
Gg
f
5
>10/
AUTO
CAL
MUTING
Input
buttons
?/1 switch
MASTER
VOL +/–
AMP
MENU
