37
Locations and Functions of Parts
h INTERCOM connector (XLR 5-pin)
Connect a headset.
To use a headset with a plug other than an XLR 5-pin plug,
consult a Sony service or sales representative.
Rear Panel
a SDI OUT area (BNC-type)
The signal from the video camera may be output as two
HD-SDI or SD-SDI signals.
The signals output from the SDI OUT 3 and SDI OUT 4
connector can be superimposed character and marker.
SD-SDI signals are output only when the system is
operating with a field frequency of 59.94/50 Hz.
For details on the field frequency setting, contact a Sony
service or sales representative.
b HD SDI OUTPUT area (BNC-type)
The normal speed video signal from the video camera can
be output as four HD-SDI signals.
c SUPER MOTION OUTPUT area (BNC-type)
The HD super slow motion signals from the video camera
can be output as two LINK-A, LINK-B or LINK-C
signals. The connectors below are spares.
The connectors in this area do not supply the color bar
signals while the power to the video camera is ON (default
setting). There is a setting on the setup menu to supply the
color bar signals even if the power to the video camera is
ON. With that setting, the color bar signals are also
supplied to the viewfinder on the camera.
For details on the setup menu, contact a Sony service or
sales representative.
d RETURN INPUT area
1 HD-SDI 1 to 4 (HD-SDI return video input 1/2/3/4)
connectors (BNC-type)
Four different HD-SDI return video input signals may be
received independently.
The selection of RET 1, 2, 3, or 4 is made by the return
switch of the video camera.
The type of input signal on RET 1, 2, 3, and 4 may be set
individually using the setup menu, or using the MSU-900
series Master Setup Unit.
For details on the setup menu, contact a Sony service or
sales representative.
Refer also to the Master Setup Unit manual.
SUPER MOTION OUTPUT
SDI OUT
HD SDI
OUTPUT
SLOT2
SLOT1
CAB
SLOT3
9CAMERA connector
w;AC IN connector
0Expansion slots
qaINTERCOM/TALLY/PGM connector
4RETURN INPUT area
6INPUT area
8OUTPUT area
qsMIC REMOTE connector
1SDI OUT area
5Ethernet connector
qdWF REMOTE connector
qfTRUNK LINE connector
qgI/O PORT connector
qlMIC1, MIC2 connectors
qkTRUNK A connector
qjRCP/CNU connector
qhWF MODE connector
7Spare connector
3SUPER MOTION OUTPUT area
2HD SDI OUTPUT area
7Spare connectors
Note
