Installation and Connections
Installation
52
Installing the Camera on the Ceiling
Using the supplied ceiling brackets, wire rope, screws
and the attachment materials (not supplied), you can
attach the camera to the ceiling.
When you install the camera, always install it on a level
ceiling. If you have to install it on an inclined ceiling,
make sure that the inclination is within ±15 degrees, so
that the pan/tilt performance is guaranteed.
• When you attach the camera to the ceiling, entrust the
installation to an experienced contractor or installer.
• Attach the camera to the ceiling firmly, after making
sure the ceiling and the attachment materials (not
including the supplied accessories) are strong enough
to bear a weight of 60 kg. If the ceiling is not strong
enough, the camera may fall and cause serious injury.
• Be sure to attach the supplied wire rope to prevent the
camera from falling.
• Check periodically, at least once a year, to ensure that
the connection has not loosened. If conditions warrant,
make this periodic check more frequently.
Before installation
After deciding the shooting direction, make the required
holes for the ceiling bracket (B) and connecting cables
on the ceiling. For the dimensions of the ceiling bracket
(B), see page 73.
Notes
• The connecting cables cannot be passed through the
ceiling bracket (A). A hole for the wiring is required
in the ceiling at the back of the camera where it is
attached to the ceiling.
• The ceiling bracket cannot be attached to the junction
box.
• Do not attach any object other than the camera to the
ceiling brackets.
Installation example
1
Remove the cable cover on the rear of the camera.
For details on how to remove it, see “To remove the
cable cover” on page 50.
2
Set IMG-FLIP to ON in the SYSTEM menu.
3
Remove the four screws on the bottom of the
camera to remove the four feet.
4
Attach the ceiling bracket (A) to the bottom of the
camera using the supplied four screws (3M3 × 8).
Position the f hole on the ceiling bracket (A) to the
front of the camera, align the screw holes on the
ceiling bracket with those on the bottom of the
camera, then attach the bracket to the camera.
WARNING
3M3 × 8 (supplied)
Ceiling
bracket (A)
Front of
camera
