Settings and Adjustments
52
PICTURE
MEMORY
Custom Settings (CUSTOM
SETUP) Z
Select “CUSTOM SETUP” after pressing SET UP.
“CUSTOM SETUP” allows you to set the playback
conditions.
Default settings are underlined.
pCOLOR SYSTEM
Selects the color system when you play a VIDEO CD.
•
AUTO: Outputs the video signal in the system of the
VIDEO CD, either PAL or NTSC. If your TV is the
DUAL system, select AUTO.
• PAL: changes the video signal of an NTSC VIDEO CD
and outputs it in PAL system.
• NTSC: changes the video signal of a PAL VIDEO CD
and outputs it in NTSC system.
Notes
• You cannot change the color system of the DVD itself.
• You can change the color system of this unit according to the
connected TV. See page 9.
pAUTO PLAY
Selects the setting of Auto Play when you connect the AC
power cord to the AC outlet.
•
OFF: does not use “TIMER,” “DEMO1“ or “DEMO2” to
start playing.
• TIMER: starts playing a disc automatically when you
connect the AC power cord to the AC outlet. By
connecting a timer (not supplied), you can start playing
at any time you want.
• DEMO1: starts playing the demonstration 1
automatically.
• DEMO2: starts playing the demonstration 2
automatically.
Storing the picture in memory
During playback, when you find the scene to be
stored in memory, press PICTURE MEMORY on the
remote.
The picture is stored in memory.
Notes
• The player can store in memory only one scene. The stored
picture appears in both the background and the startup screen.
• When the picture is stored in memory by pressing PICTURE
MEMORY, the picture stored before is not retained in memory.
• When you operate this player during storing picture in
memory, the picture does not be stored in memory.
Settings for Display (SCREEN SETUP)
7
8
0
9
CUSTOM SETUP
AUTO PLAY:
DIMMER:
PAUSE MODE:
BOOKMARK RESET
PARENTAL CONTROL
PLAYBACK MEMORY:
To set, press , then .
To quit, press .
OFF
COLOR SYSTEM: AUTO
BRIGHT
AUTO
ON
ENTER
SETUP
