Cyber-shot User Guide
Print
Operation Search
Before Use
Shooting
Viewing
Using MENU items (Shooting)
Using MENU items (Viewing)
Changing settings
Viewing images on a TV
Using with your computer
Printing
Troubleshooting
Precautions / About this camera
Contents list
Top page > Troubleshooting > Warning indicators and messages > Messages
Messages
If the following messages appear, follow the instructions.
The battery level is low. Insert new batteries or charged Nickel-Metal Hydride batteries (sold
separately). Depending on the conditions of use or the type of battery, the indicator may flash
even though there are still 5 minutes to 10 minutes of remaining battery time left.
System error
Turn the power off and then on again.
Internal memory error
Turn the power off and then on again.
Reinsert the memory card
The inserted memory card cannot be used in the camera. [Details]
The terminal section of the memory card is dirty.
The memory card is damaged.
Memory card type error
The inserted memory card cannot be used in the camera. [Details]
Error formatting internal memory
Error formatting memory card
Format the media again. [Details]
Memory card locked
You are using the memory card with the write-protect switch, and the switch is set to the
LOCK position. Set the switch to the recording position.
Read only memory card
The camera cannot record or delete images on this memory card.
No images
No images that can be played back have been recorded in the internal memory.
