Troubleshooting
78
The title cannot be deleted. cSet the write-protect tab to REC. (p. 84)
Title search does not work. cEnter a title if there is no title on the tape. (p. 52)
cUse a cassette with Cassette Memory. (p. 83)
cSet [CM SEARCH] to [ON] in the (CM SET) menu. (p. 54)
• There is a blank section in the beginning or middle of the tape. This is
not a malfunction.
Digital program editing does not
function.
cSet the input selector on the VCR correctly, then check the connection
between your camcorder and the VCR. (p. 62)
cWhen your camcorder is connected to a DV device that is not a Sony
product via an i.LINK cable, select [IR] in step 9 of “Step 1: Preparing
your camcorder and VCR for operation” (p. 64).
cAdjust the synchronization of the VCR. (p. 66)
cEnter a correct [IR SETUP] code. (p. 66)
cSelect the mode used to cancel recording pause again. (p. 65)
cSet your camcorder and the VCR more than 30 cm (12 in.) apart. (p. 65)
• The program may not be set to a blank section on the tape.
The VCR is not responding properly
during Digital program editing when
it is connected via an i.LINK cable.
• While connecting via an i.LINK cable, select [IR] in step 9 of “Step 1:
Preparing your camcorder and VCR for operation” (p. 64).
The pictures appear distorted or dark. • A/V connecting cables are connected to both your camcorder and the
Handycam Station.
cDisconnect one of the A/V connecting cables.
Symptom Cause and/or Corrective Actions
