43
References
Error Messages : continued
ERROR MESSAGES
NO SIGNAL
PLAY MD
POWER ?
PROTECTED
SORRY
TEMP OVER
TOC FORM (**)
TOC FULL
Tr. Protect
? DISC
MEANING
● Poor connection of the digital cable.
● No output signal comes out from the
connected unit to playback.
● You recorded on a playback-only
disc.
● Improper power is being supplied.
●
The write protection tab of a MiniDisc
is set to the protected position.
● You tried to record on a playback-
only disc.
● Since a track number is currently
being located or written to, the unit
cannot accept your command.
● The temperature is too high.
● There is an error in the recording
signal.
● There is no space left for recording
character information (track names,
disc names, etc.).
● The track has been protected from
being erased.
● A disc which contains data other than
music was played.
● There is an error in the signal re-
corded on the disc.
REMEDY
● Connect the digital cable securely.
●
If the portable CD player has a function to prevent sound
skips, deactivate it.
● Playback with the connected unit.
●
Replace it with a recordable disc.
● Use one of the specified power sources.
●
Move the write protection tab back to its original position.
● Replace it with a recordable MiniDisc.
● Wait for a while and try the operation again.
● Turn off the power, and wait for a while.
● Erase all of the tracks, and then record again.
● Replace it with another recordable disc.
● Edit the track with the device on which it was recorded.
● A disc which contains non-music data cannot be
played.
● Replace it with another recorded disc.
42
Number or symbol appears in (*) position.
**06-REFERENCES 02.07.2000, 10:04 AM43
