15
Overview of the components
Multi-function display 7 of the WiCOS CV chairman unit
The multi-function display 7 can display three different operating modes.
To switch between the operating modes and displays:
̈ Press the ABSTAIN key C for approx. 3 seconds.
You can switch between the following modes and displays:
–Voting mode (“Start/Stop Voting”)
– Volume adjustment mode for loudspeakers (“Volume Control”) and
–Media control mode (“Function key”).
Depending on the mode, the selection key A 8 and the selection
key
B 9 are assigned different functions.
The display has an automatic brightness control. Approx. 4 seconds after
the last key press, the brightness will be reduced. With each key press, the
display will light up with maximum brightness.
You can also switch between the operating modes using the web
server (see
page 65).
Voting mode
“Start/Stop Voting”
Display Function/Meaning
L Start Selection key B 9 starts a voting session
M Stop Selection key A 8 stops a voting session
Volume adjustment mode for
loudspeakers “Volume Control”
Display Function/Meaning
N Volume of the
conference units’
loudspeakers
Adjusted volume of the conference units’ loudspeakers K
Selection key A 8 increases the volume
Selection key B 9 reduces the volume
Media control mode
“Function key”
Display Function/Meaning
O Media control 1 Selection key A 8 controls external media devices
P Media control 2 Selection key B 9 controls external media devices
L
M
N
O P
