ENG-20
Modifying ShowView Programming
If you wish to correct the programme displayed or modify certain elements, such as the recording
speed, you can do so before you press RETURN a second time to confirm.
If you wish to... Then...
Select an input source other ◆ Press the
➛
or
❿
buttons, until the PR selection mode.
than the tuner (AV1, AV2 or AUX)
◆ Press the INPUT SEL. button one or more times to change the
input source selection.
Result: The programme number is replaced by:
• The AV1, AV2 or AUX source using the INPUT SEL.
button for a satellite tuner or external video source
➢ The input source must be selected before changing any other
value.
Record a programme every day ◆ Press the
➛
or
❿
buttons, until the DAY selection mode.
(Monday to Sunday) at the same time ◆ Press the
or
❷
buttons, until the DLY (Daily) value is
displayed.
Record a programme every week ◆ Press the
➛
or
❿
buttons, until the DAY selection mode.
on the same day and at the same time ◆ Press the
or
❷
buttons, until the W- (Week) value is
displayed, followed by the required day.
Example: W-SA (Weekly Saturday)
Extend the recording time ◆ Press the
➛
or
❿
buttons, until the STOP selection mode.
◆ Press the
or
❷
buttons to increase or decrease the stop
time.
Select the recording speed ◆ Press the
➛
or
❿
buttons, until the recording speed selection
mode.
◆ Press the
or
❷
buttons until the correct indication is
displayed:
• AUTO (Auto Tape Speed Select)
• SP (Standard Play)
• LP (Long Play)
Select the PDC recording ◆ Press the
➛
or
❿
buttons, until the PDC off mode.
◆ Press the
or
❷
buttons until the “On” indication is displayed.
☛
Do not select PDC unless you are sure the programme you
wish to record is broadcast with PDC. If you do set PDC On
(by selecting “On” in the right - hand column on the screen),
then you must set up the start-time EXACTLY according to
the published TV schedule. Otherwise the timer recording
won’t take place.
