English - 42
T
st
st
➢
You can scan for the frequency ranges available to you (and
availability depends on your country). Automatically allocated
programme numbers may not correspond to actual or desired
programme numbers. However you can sort numbers manually and
clear any channels you do not wish to watch.
1 Press the MENU () button.
Result
: The main menu is displayed.
2 Press the ▲ or ▼ button to select Channel.
Result
:
The options available in the
Channel
group are
displayed.
3 Press the ENTER () button.
Result
: The Auto Store is selected.
4 Press the ENTER () button again.
Result
: The options available in the
Auto Store group are
displayed with
Country selected.
5 Press the ENTER () button once again. Select your country
by pressing the
▲ or ▼ button.
The countries are displayed in the following order:
Belgium
-
Germany
-
Spain
-
France
-
Italy
-
Netherlands
-
Switzerland
-
Sweden
-
United Kingdom
-
Eastern Europe
-
Others.
➢
If you have selected the Others option but do not wish to
scan the PAL frequency range, store the channels manually
(see page 44).
6 Press the ENTER () button.
7 Press the ▲ or ▼ button to select Search.
Press the
œ or √ button.
8 Press the ENTER () button to start the search.
Result
: The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range. Finally, the search will end
automatically.
➢
To stop the search before it has finished, press the MENU
()button.
9 When searching and storing are complete, the Sort menu is
displayed.
◆
To sort the stored channels into the desired numerical order,
go to Step
6 of the “Sorting the Stored Channels” procedure
on page 43.
◆
To exit from the channel store function without sorting the
channels, press the
MENU () button repeatedly until the
menus disappear.
10 When the channels have been stored, you can:
◆ Sort them in the order required (see page 43)
◆ Assign a name to the stored channels (refer to page 47)
◆ Clear a channel (see page 46)
◆ Fine-tune channel reception if necessary (see page 49)
◆ Activate/deactivate the LNA (Low Noise Amplifier) feature
(see page 50)
◆ Activate/deactivate the Digital NR (Digital Noise Reduction)
feature (see page 59)
Storing Channels Automatically
TV
Channel
Auto Store
√√
Manual Store
√√
Add/Delete
√√
Sort
√√
Name
√√
▼
More
Move Enter Return
TV
Sort
From : P 1 -----
To : P-- -----
Store : ?
Move
œœ √√
Adjust Return
TV
Auto Store
Country : China
Search :
-
/+
Move Enter Return
Belgium
Germany
Spain
France
Italy
Netherlands
Switzerland
Sweden
United Kingdom
Eastern Europe
Others
Enter Return
Search
Start
Enter Return
Search
P1 C
-- -----
172MHz
Stop
TV
Move Enter Return
Auto Store
Country : Belgium
√√
Search
√√
➢
Not available in DTV or external input mode.
BP68-00491A (J60C_UK) 2005/04/18 05:11 PM Page 42
