A SERVICE OF

logo

English – 13
installation
5. Press the PTZ mechanism's A, B handles and
pull out for Main Cable connection.
6. Wrap the pipe thread of the housing top by Water
proof tape [1].
After hooking the safety cable on the hole of pipe
[2], attach the upper housing to mount bracket by
turning it at least seven turns [3]. To fi x the upper
body orientation, turn the handle of double nuts
to clockwise tightly [4].
7.
Care must be taken dome cover is hung by
internal safety cable properly. Plug fan/heater
cables into the connectors in the housing.
8. Plug the connector of cable from network box
into properly.
BA
2
1
4
3