1
Installing the Toner Cartridge
- Remove contents and packing material.
1 2 3
Place the cartridge on a
stable surface, then pull out
the tape attached to top of
cartridge, as shown.
• Place a protective sheet of paper
underneath the cartridge, in case of
toner leakage.
• Be careful not to tear the tape while
removing.
• Be careful not to spill toner
material when removing the
tape.
• Follow the above steps to install the
toner cartridge.
• Rock the toner cartridge to distribute
toner material evenly, as shown
below:
• Close the cover by pressing down
until it clicks.
Open the Top Cover by
pressing the release button.
Insert the cartridge and
close the cover.
Supplying the Paper
1 2 3
Remove the sealing tapes
and slide out the Paper
Cassette.
• Refer to page 4-1 in Operator’s Guide to
set the paper size.
• Insert the corner of the paper stack
under metal tab (A).
Place blank paper into the
Cassette.
Push the Cassette back
into place.
2
Note
A
01ML-85G/85G 99.2.18 12:2 PM ∆‰¿Ã¡ˆ6
