• is no longer displayed.
To cancel the timer, press TIMER ON/OFF
once.
• is displayed again.
To resume the timer, press TIMER ON/OFF
again.
MISCELLANEOUS
Timer Function
•
The timer enables you to switch the system on or off at specific times.
•
If you no longer want the system to be switched on or off automatically, you must cancel the timer.
•
Before setting the timer, check that the current time is correct.
•
For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
Example: You wish to wake up to music every morning.
•
ON TIME is displayed (instead
of the equalizer symbols) for a
few seconds, followed by any
switch-on time already set; you
can set the timer switch-on time.
•
The source to be selected is
displayed.
2
1
3
Switch the system
on by pressing
STANDBY/ON.
Press
TIMER/CLOCK
until TIMER is
displayed.
Press the ENTER
button.
•
is displayed to the top right of
the time, indicating that the timer
has been set.
•
The system will switch on and off
automatically at the required
times.
87
9
Press or button
to select the source to
be played when the
system switches on.
Press ENTER to
confirm the timer.
Press
STANDBY/ON to
set the system to
standby mode.
54
a. Set the hour by pressing or
button.
b. Press ENTER.
•
The minutes flash.
c. Set the minutes by pressing or
button.
d. Press ENTER.
•
OFF TIME is displayed (instead
of the equalizer symbols) for a few
seconds, followed by any switch-
off time already set; you can now
set the timer switch-off time.
•
TAPE (cassette) : Insert a cassette
tape.
•
TUNER (radio) : a Press ENTER.
b Select a preset
station by pressing
or .
•
DVD (compact disc) : Load a compact
disc.
a. Set the hour by pressing or
button.
b. Press ENTER.
•
The minutes flash.
c. Set the minutes by pressing or
button.
d. Press ENTER.
•
VOL 10 is displayed, where 10
corresponds to the volume
already set.
Set the timer
switch-off time.
6
Press or button
to adjust the volume
level and press
ENTER.
Set the timer
switch-on time.
Note
•
In step 3, 4, 5, 6, 7, 8, you can use RETURN button in the main unit to instead the ENTER button.
•
If the timer switch on and off times are identical, the word ERROR is displayed.
•
You can use Multi-Jog or on the front panel in step 4, 5, 6, 7.
