Press the Program button.
1
Press the Enter button then
use the Number buttons to
select the desired title.
23
¥
You can use also just the
Left/Right ( / /
▲
/
▼
) button.
Press the Enter button, then
use the Number buttons to
select the desired chapter.
Press the Enter button.
4
At this time, you can continue
programming if you want to.
5
¥
When programming more than
10 tracks, select and
then press the Enter button.
The program selection screen
where you can program up to
10 additional tracks appears.
¥
The selected track number is
programming and the cursor
moves to the next number.
¥
Press the Stop ( ) button twice during playback.
¥
Press the Stop ( ) button once when in the Stop mode.
¥
Press the Open/Close ( ) button on the main unit.
The disc tray will open and then close. The program will then
be deleted.
To Playback the
Tracks in the
Programmed Order
Press the Play/Pause
( ) button.
Press either the Program button or Stop ( ) button.
To Change the Program
Press the Up/Down ( ▲ / ▼ )
button to select the track
number to be changed.
123
¥
The cursor moves to the next
number when the Enter button
is pressed again.
Press the Enter button.
4
Repeat steps 1-4 above to
change the program.
5
¥
The cursor moves to the
number below.
You can program or change
particular tracks for VCD or CD
discs in the same manner.
¥
You can use also just the
Left/Right ( / ) button.
¥
You can use also just the
Left/Right
( / /
▲
/
▼
)
button.
