English
- 21
Settings
4
Press the … or † button to select the required
programme number.
Press the √ button to preset the station.
The MANUAL TUNING menu will be displayed.
5
Press the œ or √ button to start scanning the
channels.
The frequency band is scanned and the first
station found is displayed.
6
If necessary, press the … or † button to select
MFT, then press the œ or √ button to adjust the
picture.
7
Press the … or † button to select DECODER,
then press the œ or √ button to select decoder
ON or OFF.
❉ ❉ MANUAL TUNING ❉ ❉
PR : 1
CH : 021
MFT : -
NAME : - - - -
……†† œœ √√
MEMORY: OK
RETURN
❉ ❉ MANUAL TUNING ❉ ❉
PR : 1
CH : 021
MFT : -
NAME : - - - -
……†† œœ √√
MEMORY: OK
RETURN
❉ ❉ MANUAL TUNING ❉ ❉
PR : 1
CH : 021
MFT : -
DECODER : OFF
NAME : - - - -
……†† œœ √√
MEMORY: OK
RETURN
* DVD-V6400/DVD-V6500
8
Press the … or † button to select NAME.
The station name is set automatically from the
broadcast signal.
•To change the programme’s name, press the
√ button. The first letter of the name flashes.
9
10
Repeat this procedure from step 4 onwards,
until all the required stations have been stored.
11
Press the MENU button to exit the menu.
❉ ❉ MANUAL TUNING ❉ ❉
PR : 1
CH : 021
MFT : -
NAME : - - - -
……†† œœ √√
MEMORY: OK
RETURN
Select a character
in the name
Move to the next
previous or
character
Press the … or † button until the
required character is displayed
(letters, numbers or “-” character).
Press the œ or √ button
respectively.
To... Then...
If you... Then...
Wish to store the
station displayed
Do not wish to
store the station
displayed
•
Press OK to store the station.
•
Press the … or † button until the
CH is selected.
•
Press the œ or √ button to go on
scanning the frequency band and
display the next station.
