setting up _09
Ventilation lever
The ventilation lever is designed to help you get fresh air from outdoors. It can also help prevent
strong outdoor odors from entering the room through the air conditioner. The lever is located on
the lower right side of the air flow blades.
Sliding the ventilation lever to the right lets outdoor air
enter the room, and sliding the lever to the left re-circulates
existing air within the room.
Depending on your model, the ventilation lever
appearance and location may slightly differ.
Control Panel
1
2
4
THERMOSTAT
KNOB
Use the Thermostat knob to set the desired temperature. In order to cool the
room, turn the knob to the “Cool” position.
Cool - Maintains cool temperatures of between 18ºC and 29ºC..
TIMER KNOB
Use the timer knob to turn on or off the air conditioner. In order to turn off air
conditioner automatically, turn the knob to the "Timer" position.
Timer-Turn off the air conditioner after elapsing a pre-set time automatically.
FAN SPEED
SWITCH
Press the Fan Speed Switch to desired fan mode to adjusts how much air
flows through the air conditioner.
Hi - high fan speed,
Low - low fan speed.
AIR SWING
SWITCH
Press the Air Swing switch to on to circulate the air from side to side by
moving the inner air flow blades.
Off - Keeps air flow direction in the desired position
On - Provides continuous side to side air circulation
1
2
4
You should open the door above the control panel before control.
3
3
