Press the Program button.
1
Press the Enter button, then
use the Number buttons to
select the desired title.
23
•
You can also use the Left/Right
( / /
▲
/
▼
) button.
Press the Enter button, then use
the Number buttons to select the
desired chapter.
Press the Enter button.
4
At this time, you can continue
programming if you want to.
5
•
When programming more than
10 tracks, select and
then press the Enter button.
The program selection screen
where you can program up to
10 additional tracks appears.
•
The selected track number is
programmed and the cursor
moves to the next number.
•
Press the Stop ( ) button twice during playback.
•
Press the Stop ( ) button once when in the Stop mode.
•
Press the Open/Close ( ) button on the main unit.
The disc tray will open and then close.
The program will then be deleted.
To Playback the
Tracks in
Programmed Order
Press the Play/Pause
( ) button.
Press either the Program or Stop ( ) button.
To Change the Program
Press the Up/Down ( ▲ / ▼ )
button to select the track
number to be changed.
123
•
The cursor moves to the next
number when the Enter button
is pressed again.
Press the Enter button.
4
Repeat steps 1-4 above to
change the program.
5
•
The cursor moves to the
number below.
•
You can program or change
particular tracks for VCD or
CD discs in the same manner.
•
Depending on the disc, the
PROGRAM function may not
work.
•
You can also use the Left/Right
( / ) button.
•
You can also use the Left/Right
( / /
▲
/
▼
)
button.
