A SERVICE OF

logo

200Mbps Powerline Pass-Through Fast Ethernet Adapter KIT - RPLC-201PKIT- Users Manual
-27-
Leaving a network
1. Press the Security/Reset pushbutton on device C (the „leaver‟) for 5-8
seconds. The device will reset and restart with a random NMK.
2. Wait for reset to complete.
The Power indicator on device C momentarily extinguishes during reset, blinks
during restart, and then illuminates steadily.
After device C is removed from its existing network, users can disconnect the
device from the medium or join it to another logical network on the same
medium