O
WNER
’
S
M
ANUAL
2. Press below OTHER once. The Other programming screen will appear:
3. Using the number keys,enter 9 9 4.The bottom IR segment will
flash twice.
4. For the source mode,press a desired device key once (i.e.,CBL,SAT,
TV,DVD,AUD,VCR,AUX,or CD).For this example,press TV once.The
selected source device menu screen,including ,will be displayed.
5. For the source key,press a key to be moved once.For this example
press VOL ▲once.
6. For the destination mode, press a desired device key once (i.e.,CBL,
SAT,TV,DVD,AUD,VCR,AUX,or CD).For this example,press DVD once.
The selected destination device menu screen,including ,will
be displayed.
7. For the destination key,press a key to be moved once.For this example
press VOL ▲once.Upon keymoving,the bottom IR segment will flash
twice as confirmation.The program keys will appear again.
8. Repeat steps 2 through 7 two more times to map the remaining
volume control keys,substituting VOL▼and MUTE as source and
destination keys in steps 5 and 7.
9. Exit programming by pressing once.The display will return to the
last-selected device menu screen.
Upon completion of the above procedure,you can now use your
RadioShack 8-in-One Remote to control the TV’s volume and mute in
the DVD mode,as well as in the TV mode.
RESTORING A SINGLE KEYMOVED KEY
1. Press and hold Puntil the bottom IR segment flashes twice.
The program keys will appear:
continued on next page...
Using Keymover 29
RS 8in1 Kameleon OM rev 10/9/03 4:11 PM Page 29
